The Ortopedix® Stabiliser gives maximum heel/rear foot stabilisation to maintain foot and ankle alignment. The high sided support and three dimensional underfoot shape also improve the fitting of footwear, especially around the heel and ankle.
Medium/firm – adaptive support under the foot
Firm foot support which will 'bed in'
Excellent arch support
Improved heel and achilles alignment and stabilisation
Dual density cushioning (45/55) medium (Shore A test – scale is 10 to 80 – 10 = maximum cushioning, 80 = minimum cushioning)
Footbed covering – micro-porous and extra holes under the forefoot for increased air circulation
Forefoot thickness is 4.5-5.0 mm
Centre heel thickness 6.5mm
Kevlar cradle design around heel to give shock absorption, and also allow the footbed to bed in during use
Clean by rubbing gently with a sponge, hot water, and normal soap, then rinse the footbed surface under a running tap. This will help flush out any perspiration salts which may have been absorbed into the footbed fabric.
The Ortopedix® Stabiliser may only be hand washed as per the instructions above.
Allow to dry naturally in a cool place.
Do not put near heat
Do not dry on a radiator
Do not tumble dry
Do not dry in sunlight
Heat will damage the footbeds.
If you want to double check items are in stock before you make an order please give us a call first on 01748 833614, email firstname.lastname@example.org or contact us via the website link.
John Bull Clothing has been established since 1984 and prides itself on its reputation for customer service and value for money.