Warrior Armoured Fighting Vehicle

590
John Bull
2000g

BRONZE RESIN FV510 WARRIOR TRACKED ARMOURED VEHICLE

Base Dimension: 230 x 130 mm

Height : 100 mm

Free engraving Included in the price

Please leave your engraving requirements in the message box once purchased.

If your order is in stock and placed before noon on a working day, the order will be dispatched on the same day by 1st Class Mail or Next Day Parcel Service depending on the total weight of your goods. If you order after midday they may still be dispatched that day, otherwise they will be dispatched the next working day.

If you want to double check items are in stock before you make an order please give us a call first on 01748 833614, email john@johnbullclothing.com or contact us via the website link.


A modern method of casting sculptures in which the casting material is a resin mixed with powdered bronze. The finished sculpture has a surface which looks very similar to a traditionally cast bronze although it tends to be much lighter.

Casting is a method of producing one or more copies of a sculpture. Typically, the original sculpture is modelled as usual and covered with a moulding material which sets hard when dry. The mould is then separated to release the original sculpture. Once the mould is reassembled, at its most simple the casting material is poured into the void and left to set.
Traditionally, molten bronze is used as the casting material, but modern alternatives include resin. When the cast sculpture has cooled, or cured, the mould is again separated to release it, and reassembled ready to cast the next copy. When molten bronze is used, it is more typical to use a lost wax or similar process so that the finished piece is hollow rather than solid.
£60.50 inc. tax

£50.42 ex. tax
? Tax based on United Kingdom.